API STD 612 pdf download
API STD 612 pdf download.Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. (See Annex B for a guide to steam turbine nomenclature.) 3.1 alarm point preset value of a measured parameter at which an alarm is actuated to warn of...
API MPMS 4.1 pdf download
API MPMS 4.1 pdf download.Manual of Petroleum Measurement Standards Chapter 4—Proving Systems 4.2 UNCERTAINTY LIMITS WITHIN THE HIERARCHY Each level within a hierarchy will include all the errors and uncertainties from the previous or higher levels of the hierar- chy. Therefore, uncertainties will always increase throughout each level of the hierarchy. Exact, defined, and rigorous pro- cedures must be developed...
API MPMS 2.8B pdf download
API MPMS 2.8B pdf download.Manual of Petroleum Measurement Standards Chapter 2—Tank Calibration 2.8B.1 Scope and Field of Application This recommended practice is intended as a guide for establishing reference gauge heights during calibration of marine tank vessels. In many cases this calibration is carried out by shipyard engineers who may not be fully familiar with petroleum measurement requirements nor the...
ANSI API RP 10B-5 pdf download
ANSI API RP 10B-5 pdf download.Petroleum and natural gas industries — Cements and materials for well cementing 5.3.2 Preparation of slurry 5.3.2.1 Mixing Test samples shall be prepared in accordance with ISO 10426-2:2003, Clause 5. The mixing device shall be calibrated annually to a tolerance of ± 3,3 r/s (200 r/min) at 66,7 r/s (4 000 r/min) and ± 8,3...
ANSI API RP 10B-5 pdf download
ANSI API RP 10B-5 pdf download.Petroleum and natural gas industries — Cements and materials for well cementing 4 Sampling 4.1 General Samples of the neat cement or cement blend, solid and liquid additives, and mixing water are required to test a slurry according to this part of ISO 10426. Accordingly, the best available sampling technology should be employed to ensure...
API RP 2Z pdf download
API RP 2Z pdf download.Recommended Practice for Preproduction Qualification for Steel Plates for Offshore Structures 1.2 SCOPE This Recommended Practice covers requirements for Preproduction qualification, by special welding and mechanical testing, of specific steelmaking and processing procedures for the manufacture of steel of a specified chemical composition range by a spe- cific steel producer. This is a Recommended Practice for...
API MPMS 4.9.1 pdf download
API MPMS 4.9.1 pdf download.Manual of Petroleum Measurement Standards Chapter 4—Proving Systems 2.0 Scope Chapter 4, Section 9 covers all the procedures required to determine the field data necessary to calculate a Base Prover Volume (BPV) of either Displacement Provers or Volumetric Tank Provers. It will enable the user to perform all the activities necessary to prepare the prover, conduct...
API RP 5UE pdf download
API RP 5UE pdf download.Recommended Practice for Ultrasonic Evaluation of Pipe Imperfections 1 Scope 1.1 This recommended practice describes procedures which may be used to “prove-up” the depth or size of imper- fections. Included in this practice are the recommended pro- cedures for ultrasonic prove-up inspection of new pipe using the Amplitude Comparison Technique and the Amplitude- Distance Differential Technique...
API RP 14B pdf download
API RP 14B pdf download.Petroleum and natural gas industries — Subsurface safety valve systems — Design, installation, operation and redress 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 9000 and the following apply. 3.1 control line conduit utilized to transmit control signals to SCSSVs 3.2 emergency shutdown system system of stations...
API SPEC 14A pdf download
API SPEC 14A pdf download.Petroleum and natural gas industries — Downhole equipment — Subsurface safety valve equipment 1 Scope This International Standard provides the minimum acceptable requirements for subsurface safety valves (SSSVs). It covers subsurface safety valves including all components that establish tolerances and/or clearances which may affect performance or interchangeability of the SSSVs. It includes repair operations and the...