API 2540 pdf download
API 2540 pdf download.API2540 Liquid Volume Correction User Program (ROC300-Series and FloBoss™ 407 Flow Managers) (ROCLINK™ for DOS Configuration Software) 1.1 Scope of this Manual This document serves as a user manual for the API2540 Liquid Volume Correction User Program (QER 03Q008), intended for use with the ROC300-series of Remote Operation Controllers (ROCs) with a FlashPAC, version 2.12 or greater,...
API MPMS 6.2 pdf download
API MPMS 6.2 pdf download.Manual of Petroleum Measurement Standards Chapter 6—Metering Assemblies 5.1 DISPLACEMENT METERS Displacement meters (API MPMS Ch. 5.2) will require some form of signal output, either mechanical or electronic. Note that whenever a meter with a manual calibrator mounted below the pulser is retrofitted with an electronic pulse output device, the calibrator must be removed. Displacement meters...
ANSI API RP 17M pdf download
ANSI API RP 17M pdf download.Petroleum and natural gas industries — Design and operation of subsea production systems 1 Scope This part of ISO 1 3628 provides functional requirements and recommendations for ROT intervention systems and interfacing equipment on subsea production systems for the petroleum and natural gas industries. This part of ISO 1 3628 does not cover manned intervention...
API 9A pdf download
API 9A pdf download.Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance 1 Scope This International Standard specifies the minimum requirements and terms of acceptance for the manufacture and testing of steel wire ropes not exceeding rope grade 2160 for the petroleum and natural gas industries. Typical applications include tubing lines, rod...
API RP 31A pdf download
API RP 31A pdf download.Standard Form for Hardcopy Presentation of Downhole Well Log Data 1 Scope The variety, use, and value of log recordings of subsurface properties have been greatly increased and expanded since last revision of Recommended Practice 31. A wide diver- sity oflog measurements (from and cased routinely being combined to interpret the original status of newly drilled...
API MPMS 6.2 pdf download
API MPMS 6.2 pdf download.Manual of Petroleum Measurement Standards Chapter 6—Metering Assemblies 4 Loading Rack Metering Systems The loading rack metering systems described in this stan- dard are those that apply to transport-type truck facilities. The rack may be of a single-product/single-meter, single- product/multi-meter, or multi-product/multi-meter design. The design of the rack should allow one meter to be proved without...
API MPMS 8.4 pdf download
API MPMS 8.4 pdf download.Standard Practice for Sampling and Handling of Fuels for Volatility Measurement 1. Scope 1.1 This practice covers procedures and equipment for obtaining, mixing, and handling representative samples of volatile fuels for the purpose oftesting for compliance with the standards set forth for volatility related measurements appli- cable to light fuels. The applicable dry vapor pressure equiva-...
API MPMS 2.2F pdf download
API MPMS 2.2F pdf download.Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks 5 Equipment 5.1 Electro-optical distance-ranging instrument 5.1.1 The angle-measuring part of the instrument shall have an angular graduation and resolution equal to or better than 0,002 gon. This part of the instrument shall have a repeatability equal to or better than ± 0,005 gon. 5.1.2...
API MPMS 2.2E pdf download
API MPMS 2.2E pdf download.Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks 1 Scope This part of ISO 12917 specifies manual methods for the calibration of nominally horizontal cylindrical tanks, installed at a fixed location. It is applicable to horizontal tanks up to 4 m in diameter and 30 m in length. The methods are applicable to...
API RP 13M pdf download
API RP 13M pdf download.Recommended Practice for the Measurement of Viscous Properties of Completion Fluids 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 bob fixed inner cylinder of a concentric-cylinder viscometer 2.2 completion fluid any fluid used during the completion phase of a well 2.3 concentric-cylinder viscometer rotational viscometer that consists...