AS 2809.2 pdf download
AS 2809.2 pdf download.Road tank vehicles for dangerous goods 1.6 General vehicle requirements 1.6.1 Spillage control Any hot component shall be protected in the event of spills or leaks, by a shield or deflector. The spillage hazard requirements of AS 2809.1 Clause 2.1.15 and the following requirements shall apply: (a) The distance between a spillage shield and any cargo-carrying component...
AS 2890.5 pdf download
AS 2890.5 pdf download.Parking facilities 1.1 Scope This Standard sets out requirements for the location, arrangement and dimensions of on-street parking facilities. It includes provisions for special classes of vehicles and for people with disabilities, together with guidelines for the control of parking. It normally applies to parking on public roads that provide for through traffic as well as traffic...
AS 3772 pdf download
AS 3772 pdf download.Pre-engineered fire protection systems for cooking equipment 1.1 Scope This Standard sets out requirements for the design, installation commissioning and maintenance of pre-engineered fire protection systems for the protection of unenclosed cooking appliances that produce grease-laden vapours and which may have an open surface of cooking oil or fat. This Standard also applies to the grease removal...
AS 2805.6.5.3 pdf download
AS 2805.6.5.3 pdf download.Electronic funds transfer — Requirements for interfaces 1 Scope This Standard defines the interface and method to initialize remotely a terminal cryptographic unit (TCU). This Standard provides a method that removes the requirement for visits by agents of sponsors and acquirers during the life of a TCU for the purpose of initialization of key management cryptographic variables....
AS 2809.1 pdf download
AS 2809.1 pdf download.Road tank vehicles for dangerous goods 1.1 Scope This Standard specifies general requirements for the design, construction, testing, maintenance and inspection of road tank vehicles, irrespective of the cargo, that are intended for the road transport of dangerous goods. The Standard deals with vehicles that are designed and constructed specifically as road tank vehicles. This Standard is...
AS 3862 pdf download
AS 3862 pdf download.External fusion-bonded epoxy coating for steel pipes 1.1 Scope This Standard specifies requirements and methods of test for external fusion-bonded epoxy (FBE) coating of steel pipes for protection against corrosion. This Standard covers both single-layer and multi-layer coating systems. NOTE 1 Guidelines to purchasers on information that should be supplied by the purchaser and those variables that...
AS 4428.16 pdf download
AS 4428.16 pdf download.Fire detection, warning, control and intercom systems — Control and indicating equipment 1 Scope This Standard specifies requirements, test methods and performance criteria for emergency warning control and indicating equipment (EWCIE) as the main component of an emergency warning system (EWS). This Standard covers three Grades of EWCIE to suit different risks and regulatory requirements. The additional...
AS 3992 pdf download
AS 3992 pdf download.Pressure equipment—Welding and brazing qualification 1.1.1 Scope This Standard specifies requirements for the qualification of welding and brazing procedures, welders and brazers, and requirements for production weld testing other than non-destructive examination, when used in the manufacture, alteration and repair of boilers, pressure vessels, pressure piping and their components as specified in AS/NZS 1200, AS 1210, AS...
AS 2885.5 pdf download
AS 2885.5 pdf download.Pipelines — Gas and liquid petroleum 1.1 Scope and exclusions 1.1.1 General This document sets out methods for the pressure testing of petroleum pipelines constructed of steel, designed in accordance with AS/NZS 2885.1, and operated in accordance with AS 2885.3. It may also be used for testing other pipelines, including pipelines designed or operated in accordance with...
AS 4100 pdf download
AS 4100 pdf download.Steel structures 1.1 Scope and exclusions 1.1.1 Scope This Standard sets out minimum requirements for the design and the engineering aspects of fabrication and erection, and modification of steelwork in structures in accordance with the limit states design method. This Standard applies to buildings, structures and cranes constructed of steel. NOTE For design of box and longitudinally...