AS 2341.18 pdf download
AS 2341.18 pdf download.Methods of testing bitumen and related roadmaking products 1 Scope The objective of the Test Method is to set out two procedures which use a ring and ball apparatus for the determination of the softening point of bitumens and related roadmaking products. The materials concerned have a softening point in the range 30 °C to 157 °C....
AS 2341.26 pdf download
AS 2341.26 pdf download.Methods of testing bitumen and related roadmaking products 1 Scope This document sets out a method for determining the quantity of coarse particles in a bituminous emulsion sample that is retained on a specified sieve. It is applicable for use with conventional bituminous emulsions, high binder content bituminous emulsions and polymer modified bituminous emulsions that have sieve...
AS 1141.11.1 pdf download
AS 1141.11.1 pdf download.Methods for sampling and testing aggregates 1 Scope This document sets out the method for the determination of particle size distribution in coarse and fine aggregates by sieving. The amount passing a 75 μm sieve may be determined using AS 1141.12 or by the method given in this document when samples are washed over a 75 μm...
AS 2758.5 pdf download
AS 2758.5 pdf download.Aggregates and rock for engineering purposes 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. NOTE Documents referenced for informative purposes are listed in the Bibliography. AS 1141.3.1, Methods for sampling and testing aggregates, Method 3.1: Sampling—Aggregates AS...
AS 1289.6.6.1 pdf download
AS 1289.6.6.1 pdf download.Methods of testing soils for engineering purposes 1 Scope This Method describes a procedure for determining the rate and magnitude of consolidation of soil when it is restrained laterally and loaded and drained axially, using either manual loading or automated equipment. The Method gives the most reliable results when used on saturated clay soils, which the consolidation...
AS 2758.0 pdf download
AS 2758.0 pdf download.Aggregates and rock for engineering purposes Identification of the rock types to be used in the production of aggregate may provide an initial indication of suitability for purpose. However, it should be emphasized that rock type identification cannot substitute for the performance of the engineering tests detailed in the AS 2758 series. Simply because two sources have...
AS 1603.17 pdf download
AS 1603.17 pdf download.Automatic fre detection and alarm systems 3.1 General Components may be supplied in two ways: . [a) A standalone system containing the components, connections and instructions required for that installation; or (b) Individual components intended to be installed as part of another warning system. Components shall be compatible when interconnected to form a system. Leads connecting a...
AS 2699.3 pdf download
AS 2699.3 pdf download.Built-in components for masonry construction 1.3 Terms and definitions For the purpose of this Standard, the definitions below apply. 1.3.1 batch clearly identifiable collection of units, manufactured consecutively or continuously under the same conditions, using material or compound to the same specification 1.3.2 corrosivity category C standardized rating of corrosivity of atmosphere in relation to the one-year...
AS 1576.6 pdf download
AS 1576.6 pdf download.Scafolding 1.1 Scope and exclusions 1.1.1 Scope This Standard specifies requirements for unsheeted metal tube-and-coupler scaffolding that does not exceed 30 m in height to top working platforms deemed to conform to the performance requirements of AS/NZS 1576.1 for light, medium and heavy duty loads. 1.1.2 Exclusions This Standard does not apply to一 a prefabricated (modular) scaffolds...
AS 1484.13.3 pdf download
AS 1484.13.3 pdf download.IEEE Recommended Practice for Learning Technology—ISO 21000-2:2005 Information Technology—Multimedia Framework (MPEG-21) 1.1 Scope This recommended practice specifies how the elements and attributes defined in ISO 21000-2:2005 Multimedia Framework—Part 2: Digital Item Declaration (MPEG-21 DID) relate to the components of the conceptual model for resource aggregation defined in IEEE Std 1484.13.1™-2012. 6. Conformance Conformance to this recommended practice...